Scantool 2000 ECUsim Bedienungsanleitung PDF herunterladen (Seite 17)

ECUsim™ 2000 User Guide 17

7.1.5 ECM: Mode 7

When the MIL is on, Mode 7 reports four pending DTCs:

 P0107

 P0207

 P0307

 C0307

7.1.6 ECM: Mode 9

The following infotypes are supported:

Infotype

Description

Scan Tool Display

Supported Infotypes

VIN Message Count

VIN

1G1JC5444R7252367

Calibration ID message count

Calibration ID

JMB*36761500

CVN Message Count

CVN

1791BC82

ECUNAME

ECU1-EngineControl

* Message count infotypes are not supported in ISO 15765-4, per SAE J1979.

7.1.7 ECM: Mode A

After the first MIL event (user pressed the “MIL” button), Mode A reports one

permanent DTC:

 P1234

This mode is only available for ISO15765-4.

SAE J1979 does not define Mode A for the SAE J1850, ISO 9141-2,

or ISO 14230-4 protocols.

Permanent DTCs cannot be erased using a Mode 04 request.

To erase this DTC, you must reset the simulator by issuing the

RESET command or cycling the power.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23

Keine Kommentare

Scantool 2000 ECUsim Bedienungsanleitung Seite 17